A high performance bedding and sealing adhesive based on MS polymer technology, that is easy to apply and cures quickly. Used to seal and bed deck and hull fittings, seal windows and hatches. It bonds to metals, fibreglass, wood and most plastics.
Instructions for use.
Ensure the surface is clean, dry and grease free.
Apply as required to one surface
Assemble parts by pressing into place leaving a minimum layer of 1 mm.
Remove excess and smooth exposed surfaces with water.
Zycore must be over painted within six hours of application. If painting outside six hours abraded with fine abrasive paper first.
Application temperature +5°C to +40°C
Skins in one hour, full cure 2-5 days depending on thickness.
|
|
|
Oceanworkshop
Parson Adhesives
